This Branch Take-off Shall Be Used In Case Of The Depth Of Branch Duct Is Less Than The Depth Of Main Duct. Return And Exhaust Air Duct Branch Take-off Branch Up To 500mm.(20″) Inches Width Branch 525mm.(21″) Inches …
D-companion Flange C-pittsburgh Seam Fiberglass Insulation With Aluminium Vapor Barrier Gasket With Corner Angle150x150mm.(6″x6″)and1.40mm. Belt Shall Be Provided At Interval Of 1000mm.(3ft) Self-adhesive Tape 62mm.(21/2″)wide And Aluminium Duct Adhesive,fire Retardant Duct Insulation B-inside Groove A-drive …
Type Of Vibration Isolator Shall Be Refer To Specification. Locate Condensing Unit So That Airflow Is Unrestricted On All Side And Above. Allow Sufficient Space For Wiring,refrigerant Piping And Servicing Unit. The Solenoid Valve Shall …
Galvanized Steel Sheet 1.10mm. Thick Washer (gauge No.20) And With Sides Folding Under Duct Insulation Secured With All Steel Supports Shall Be Painted With 2 Coats Of Anti-rust Paint And 1 Coat Of Finished Coat …